GB/T 15234-1994: Translated English of Chinese Standard (GB/T15234-1994): Plastics flat pallets
https://www.chinesestandard.net, 5 nov. 2021 - 13 pages
This Standard specifies the basic requirements for product classification, technical requirements, test methods, inspection rules and signs, transportation, and storage of plastic flat pallets. This Standard is applicable to single-sided and double-sided plastic flat pallets (hereinafter referred to as pallets) that use high-density polyethylene, polypropylene, etc. as the main raw materials, and can be used in 2-way or 4-way with a cross load P of 1000 kg.
Avis des internautes - Rédiger un commentaire
Aucun commentaire n'a été trouvé aux emplacements habituels.
Theme Contents and Scope of Application
Markings Transportation and Storage
4-way pallet A1 and A2 according accuracy affect use Deflection Appearance arithmetic mean value average batch of products Calculation carried centre colour corbel Corner drop test cracks and deformation Deflection rate deflection value deformation that affect diagonal length Double-sided used 4-way error evenly distributed Formula hard horizontal surface height of Point horizontal plane includes the mass increase the test length H load for 24h load is 0.1P Load Test load lower spread plate measure the diagonal mechanical properties performance Physical and mechanical Place the pallet Procedures provisions raw material record the deflection record the Value result is expressed Results After unloading results measured Schematic Diagram shown in Figure specimen spread plate relative Stacking test Table Technical Requirements temperature Tensile strength test Test device test load block test load includes test load plate test of lower test result type inspection Uniform load strength upper spread plate